Makaleler

Transport Tekniği Grubu elemanları tarafından hakemli dergilerde yayınlanan makaleler:

2026

  1. Karakoca, M. R., Candaş, A., & İmrak, C. E. (2026). Topoloji Optimizasyonu ile Bantlı Konveyör Braketinin Yapısal Analizi ve Tasarım Geliştirilmesi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 14(2), 666-676. https://doi.org/10.29109/gujsc.1858575
  2. Çiner, A., Turu, V., Oliva, M., Sarıkaya, M. A., Candaş, A., Altınay, O., Ventura, J., Yıldırım, C., Vidal-Romaní, J. R., Carrasco, R. M., Wilken, K. M., Seong, Y. B., & Yu, B. Y. (2026). Last glacial termination in Andorra, southeastern Pyrenees. Quaternary Science Reviews, 391, 110199. https://doi.org/10.1016/j.quascirev.2026.110199
  3. Topal, T., Candaş, A., Kalay, E., & İmrak, C. E. (2026). Thermomechanical behavior of IN718 bolted joints in aerospace propulsion at elevated temperatures. Scientific Journal of Silesian University of Technology. Series Transport, 131, 207-228. https://doi.org/10.20858/sjsutst.2026.131.13
  4. Sancak, A., Candaş, A., Kurt, S., & İmrak, C. E. (2026). Effects of seawater corrosion, notch timing, and test temperature on the impact toughness of AISI 1008 marine chain steel. Fracture and Structural Integrity, 20(78), 186-206. https://doi.org/10.3221/IGF-ESIS.78.11

2025

  1. Sarıkaya, M. A., Candaş, A., Ege, İ., & Wilcken, K. M. (2025). Geochronology and ice‐flow modelling of the Late Quaternary glaciers on Mt. Soğanlı, Türkiye. Journal of Quaternary Science, 40(1), 71-85. https://doi.org/10.1002/jqs.3660
  2. Adsoy, A., Kurt, S., & Topuz, A. (2025). Influence of fly ash and waste tire rubber particles on mechanical and tribological properties of composite brake linings. Polymer Composites, 46(6), 5759-5772. https://doi.org/10.1002/pc.29328
  3. Aldemir, Ü., Çakır, O., & İmrak, C. E. (2025). The Effects of Tool Wear on the Accuracy of Complex Geometry in Sheet Blanking. Journal of Manufacturing and Materials Processing, 9(12), 391. https://doi.org/10.3390/jmmp9120391

2024

  1. Çiner, A., Oliva, M., Ventura, J., Sarıkaya, M. A., Candaş, A., Palacios, D., Altınay, O., Binnie, S. A., & Castaneda, N. (2024). Late Pleistocene glacial chronology and paleoclimate of the Cadí Massif, SE Pyrenees, Spain: Insights from 36Cl cosmogenic surface exposure dating and glacier modelling. Quaternary Science Reviews, 345, 109020. https://doi.org/10.1016/j.quascirev.2024.109020
  2. Candaş, A., Öterkuş, E., & İmrak, C. E. (2024). Modelling and analysis of wire ropes subjected to transverse impact load using peridynamic theory. Journal of the Faculty of Engineering and Architecture of Gazi University, 39(2), 847-858. https://doi.org/10.17341/gazimmfd.1225810
  3. Candaş, A., Oterkus, E., & Imrak, C. E. (2024). Ordinary state-based peridynamic modelling of crack propagation in functionally graded materials with micro cracks under impact loading. Mechanics of Advanced Materials and Structures, 31(30), 13502-13517. https://doi.org/10.1080/15376494.2023.2287180

2023

  1. Sahin, U., Ren, H., Imrak, C. E., & Rabczuk, T. (2023). Computational modeling of quasi static fracture using the nonlocal operator method and explicit phase field model. Engineering with Computers, 39(5), 3617-3628. https://doi.org/10.1007/s00366-022-01777-5
  2. Hacıoğlu, A., Candaş, A., & Baykara, C. (2023). Large Deflections of Functionally Graded Nonlinearly Elastic Cantilever Beams. Journal of Engineering Materials and Technology, 145(2). https://doi.org/10.1115/1.4056034
  3. Candaş, A., Oterkus, E., & İmrak, C. E. (2023). Peridynamic simulation of dynamic fracture in functionally graded materials subjected to impact load. Engineering with Computers, 39(1), 253-267. https://doi.org/10.1007/s00366-021-01540-2

2022

  1. Yildirim, M., & Kurt, S. (2022). Effect of Different Types of Electric Drive Units on the Energy Consumption of Heavy Commercial Electric Vehicles. World Electric Vehicle Journal, 13(5), 92. https://doi.org/10.3390/wevj13050092
  2. Şahin, T., Imrak, C. E., Cakir, A., & Candaş, A. (2022). Evolved model for early fault detection and health tracking in marine diesel engine by means of machine learning techniques. Pomorstvo, 36, 95-104. https://doi.org/10.31217/p.36.1.11
  3. Bulut, C. O., Jena, S. P., & Kurt, S. (2022). Experimental and computational study on dynamic analysis of cracked simply supported structures under moving mass. Frattura ed Integrità Strutturale, 16(60), 114-133. https://doi.org/10.3221/IGF-ESIS.60.09
  4. Kalay, E., Boğoçlu, M. E., & Bolat, B. (2022). Mass flow rate prediction of screw conveyor using artificial neural network method. Powder Technology, 408(117757). https://doi.org/10.1016/j.powtec.2022.117757
  5. Köse, O., Sarıkaya, M. A., Çiner, A., Candaş, A., Yıldırım, C., & Wilcken, K. M. (2022). Reconstruction of Last Glacial Maximum glaciers and palaeoclimate in the central Taurus Range, Mt. Karanfil, of the Eastern Mediterranean. Quaternary Science Reviews, 291(107656). https://doi.org/10.1016/j.quascirev.2022.107656

2021

  1. Žebre, M., Sarıkaya, M. A., Stepišnik, U., Colucci, R. R., Yıldırım, C., Çiner, A., Candaş, A., Vlahović, I., Tomljenović, B., Matoš, B., & Wilcken, K. M. (2021). An early glacial maximum during the last glacial cycle on the northern Velebit Mt. (Croatia). Geomorphology, 392, 107918. https://doi.org/10.1016/j.geomorph.2021.107918
  2. Sancak, A., Candaş, A., & İmrak, C. E. (2021). Asansör Kabin Kılavuz Ray Konsol Tasarımlarının Deprem Yükü Altında Analizi ve Karşılaştırılması. European Journal of Science and Technology, 24, 60-66. https://doi.org/10.31590/ejosat.901663
  3. Candaş, A., Sancak, A., & İmrak, C. E. (2021). Asansör Sistemlerinde Gürültü Ölçümü. European Journal of Science and Technology(24), 75-80. https://doi.org/10.31590/ejosat.901187
  4. Candaş, A., Oterkus, E., & İmrak, C. E. (2021). Dynamic Crack Propagation and Its Interaction With Micro-Cracks in an Impact Problem. Journal of Engineering Materials and Technology, 143(1), 011003. https://doi.org/10.1115/1.4047746

2020

  1. Salman, Ö., & İmrak, C. E. (2020). Experimental investigation of corrosion effect on bending fatigue of the wire ropes. Indian Journal of Engineering and Materials Sciences, 27, 770-775. https://doi.org/10.56042/ijems.v27i3.45095
  2. Candaş, A., Sarikaya, M. A., KÖSE, O., Şen, Ö. L., & Çiner, A. (2020). Modelling Last Glacial Maximum ice cap with the Parallel Ice Sheet Model to infer palaeoclimate in south‐west Turkey. Journal of Quaternary Science, 35(7), 935-950. https://doi.org/10.1002/jqs.3239
  3. Bulut, C. O., Jena, S. P., & Kurt, S. (2020). Numerical and FEM Investigation on Dynamic Response of Damaged Cantilever Structures Carrying Transit Load. International Review of Mechanical Engineering (I.R.E.M.E.), 14(11), 699. https://doi.org/10.15866/ireme.v14i11.20126

2019

  1. Onur, Y. A., İmrak, C. E., & Onur, T. Ö. (2019). Discarding lifetime investigation of a rotation resistant rope subjected to bending over sheave fatigue. Measurement, 142, 163-169. https://doi.org/10.1016/j.measurement.2019.04.078
  2. Köse, O., Sarıkaya, M. A., Çİner, A., & Candaş, A. (2019). Late Quaternary glaciations and cosmogenic <sup>36</sup> Cl geochronology of Mount Dedegöl, south‐west Turkey. Journal of Quaternary Science, 34(1), 51-63. https://doi.org/10.1002/jqs.3080

2017

  1. Onur, Y. A., & İmrak, C. E. (2017). Discard fatigue life of stranded steel wire rope subjected to bending over sheave fatigue. Mechanics & Industry, 18(223). https://doi.org/10.1051/meca/2016049
  2. Onur, Y., İmrak, C. E., & Onur, T. (2017). Investigation on Bending over Sheave Fatigue Life Determination of Rotation Resistant Steel Wire Rope. Experimental Techniques, 41(5), 475-482. https://doi.org/10.1007/s40799-017-0188-z

2016

  1. Onur, Y. A., İmrak, C. E., & Onur, T. Ö. (2016). Investigation of Bending over Sheave Fatigue Life of Stranded Steel Wire Rope By Artificial Neural Networks. International Journal of Mechanical And Production Engineering, 4(9), 47-49.

2014

  1. Candas, A., Kurt, S., Gerdemeli, I., & Kayaoglu, E. (2014). An Experimental Stress Analysis of a Jib Crane. Key Engineering Materials, 572, 173-176. https://doi.org/10.4028/www.scientific.net/KEM.572.173
  2. Gerdemeli, I., & Kurt, S. (2014). Design and Finite Element Analysis of Gantry Crane. Key Engineering Materials, 572, 517-520. https://doi.org/10.4028/www.scientific.net/KEM.572.517
  3. Altuntas, M., Salman, O., & Imrak, C. E. (2014). Experimental Stress Analysis of Elevator Guiding Equipment. Key Engineering Materials, 572, 177-180. https://doi.org/10.4028/www.scientific.net/KEM.572.177
  4. Gerdemeli, I., Kurt, S., & Anil, A. S. (2014). Fatigue Life Analysis of Wire Rope Strands with Finite Element Method. Key Engineering Materials, 572, 513-516. https://doi.org/10.4028/www.scientific.net/KEM.572.513

2013

  1. Onur, Y. A., & İmrak, C. E. (2013). Experimental determination of degradation influence on bending over sheave fatigue life of steel wire wopes. Indian Journal of Engineering & Materials Sciences, 20, 14-20.

2012

  1. Gerdemeli, İ., Kurt, S., & Taşdemir, B. (2012). Design and Analysis with Finite Element Method of Jib Crane. Machines, Technologies, Materials, 6(8), 90-93.
  2. İmrak, C. E., & Kocaman, M. (2012). Design Optimization on Elevator Car for Double-Deck System. Machines, Technologies, Materials, 6(8), 37-40.
  3. Onur, Y. A., & İmrak, C. E. (2012). Experimental and theoretical investigation of bending over sheave fatigue life of stranded steel wire rope. Indian Journal of Engineering & Materials Sciences, 19, 189-195.
  4. Onur, Y. A., & İmrak, C. E. (2012). Reliability analysis of elevator car frame using analytical and finite element methods. Building Services Engineering Research and Technology, 33(3), 293-305. https://doi.org/10.1177/0143624411413168

2011

  1. Erdönmez, C., & İmrak, C. E. (2011). A finite element model for independent wire rope core with double helical geometry subjected to axial loads. Sadhana, 36(6), 995-1008. https://doi.org/10.1007/s12046-011-0053-1
  2. Erdönmez, C., & İmrak, C. E. (2011). Advances in 3D wire rope modeling and numerical analysis. International Journal of Transport & Logistics Medzinárodný časopis DOPRAVA A LOGISTIKA, 11(17), 57-62.
  3. Gerdemeli, I., Cotur, A. E., Kayaoglu, E., & Candas, A. (2011). Computer Aided Valve Design of Shock Absorbers Used in Vehicles. Key Engineering Materials, 486, 270-273. https://doi.org/10.4028/www.scientific.net/KEM.486.270
  4. Fetvaci, C., & Imrak, C. E. (2011). Computer Modeling and Simulation of Spur Involute Gears by Generating Method. Key Engineering Materials, 450, 103-106. https://doi.org/10.4028/www.scientific.net/KEM.450.103
  5. Gerdemeli, I., Fetvaci, C., & Kayaoglu, E. (2011). Design for Assembly in Concurrent Engineering - A Case Study on its Application: Glass Block Holder and Glass Mold. Key Engineering Materials, 450, 141-144. https://doi.org/10.4028/www.scientific.net/KEM.450.141
  6. Gerdemeli, I., Esen, I., & Özer, D. (2011). Dynamic Response of an Overhead Crane Beam Due to a Moving Mass Using Moving Finite Element Approximation. Key Engineering Materials, 450, 99-102. https://doi.org/10.4028/www.scientific.net/KEM.450.99
  7. Erdoğan, M., & İmrak, C. (2011). Flow due to non-coaxial rotation of a porous disk and a second grade fluid rotating at infinity. International Journal of Non-Linear Mechanics, 46(7), 986-989. https://doi.org/10.1016/j.ijnonlinmec.2011.04.013
  8. Erdönmez, C., & İmrak, C. E. (2011). Modeling Techniques of Nested Helical Structure Based Geometry for Numerical Analysis. Strojniški vestnik – Journal of Mechanical Engineering, 57(4), 283-292. https://doi.org/10.5545/sv-jme.2009.006
  9. Kayaoğlu, E., Salman, Ö., & Candaş, A. (2011). Study on Stress and Deformation of an Elevator Safety Gear Brake Block Using Experimental and FEA Methods. Advanced Materials Research, 308-310, 1513-1518. https://doi.org/10.4028/www.scientific.net/AMR.308-310.1513
  10. Erdönmez, C., & İmrak, C. (2011). Tel Halatların Parametrik Denklemler ile Modellenmesi ve Gerilme Analizi. İTÜ Dergisi/D Mühendislik, 10(3), 93-104.
  11. Onur, Y. A., & İmrak, C. E. (2011). The influence of rotation speed on the bending fatigue lifetime of steel wire ropes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225(3), 520-525. https://doi.org/10.1243/09544062JMES2275
  12. Erdönmez, C., & Imrak, C. E. (2011). Wire Strand and IWRC Modeling and Contact Analysis Using Finite Elements. Key Engineering Materials, 450, 115-118. https://doi.org/10.4028/www.scientific.net/KEM.450.115
  13. Gerdemeli, İ., Kurt, S., & Kayaoğlu, E. (2011). Finite Element Method and Experimental Analysis of Rectangular Plates. Hutnické listy, LXIV, 31-34.
  14. Özer, D. (2011). Validation of Contact Wire Simulations on the Basis of Scaled Down Contact Wire Cutting Experiments. Key Engineering Materials, 450, 457-460. https://doi.org/10.4028/www.scientific.net/KEM.450.457

2010

  1. Gerdemeli, I., Kurt, S., & Özer, D. (2010). A SOLUTION OF MOVING CONVEYOR BELT CRITICAL VELOCITY PROBLEM OF THE FREE TRANSVERSE VIBRATIONS. The International Journal of Transport & Logistics Medzinárodný časopis DOPRAVA A LOGISTIKA(7), 226-233.
  2. İmrak, C., & Salman, Ö. (2010). Füniküler sistemler ve Türkiye’de kullanımı. Mühendis ve Makina, 51(605), 37-41.
  3. Imrak, C. E., & Erdönmez, C. (2010). On the Problem of Wire Rope Model Generation with Axial Loading. Mathematical and Computational Applications, 15(2), 259-268. https://doi.org/10.3390/mca15020259
  4. Erdoğan, M. E., & İmrak, C. E. (2010). Steady circulatory flow of a second grade fluid about a rotating porous cylinder. International Journal of Engineering Science, 48(11), 1225-1232. https://doi.org/10.1016/j.ijengsci.2010.06.007
  5. Onur, Y. A., & İmrak, C. E. (2010). Strain Measurement of Stranded Rope Subjected to Bending over Sheave Fatigue. Transport & Logistics, 10(7), 146-149.
  6. İmrak, C., & Salman, O. (2010). Taşıyıcı Halatların Deneysel Gerilme Analizi. Mühendis ve Makina, 51(606), 23-29.
  7. Esen, İ., & Gerdemeli, İ. (2010). Hareketli yükler altındaki köprülü kren kirişlerinin dinamik davranışı. İTÜ Dergisi/D Mühendislik, 9(5), 145-156.

2009

  1. Erdoğan, M. E., & İmrak, C. E. (2009). An Analytical Solution of the Navier-Stokes Equation for Flow over a Moving Plate Bounded by Two Side Walls. Strojniški vestnik - Journal of Mechanical Engineering, 55(12), 749-754.
  2. İmrak, C. E., & Salman, Ö. (2009). An application of reverse engineering in concurrent engineering. Proceeding of PiME09, 52(3), 85-90.
  3. Imrak, C. E., & Gerdemeli, İ. (2009). Application of the Airy’s stress function to determine friction and maximum pressure coefficients in undercut grooves. Advances in Mathematics Scientific Journal, 2009(1), 1-11.
  4. Erdoğan, M. E., & İmrak, C. E. (2009). On the comparison of the solutions obtained by using two different transform methods for the second problem of Stokes for Newtonian fluids. International Journal of Non-Linear Mechanics, 44(1), 27-30. https://doi.org/10.1016/j.ijnonlinmec.2008.08.004
  5. İmrak, C. E., & Gerdemeli, İ. (2009). On the Solution of the Deflections of Thin Clamped Rectangular Plates with a Distributed Load. Advances in Mathematical Sciences Journal (AMSJ), 2009, 1-15.
  6. Erdoğan, M. E., & İmrak, C. E. (2009). Some Effects of Side Walls on Unsteady Flow of a Viscous Fluid over a Plane Wall. Mathematical Problems in Engineering, 2009, 1-16. https://doi.org/10.1155/2009/725196
  7. Imrak, E., & Fetvaci, C. (2009). The Deflection Solution of a Clamped Rectangular Thin Plate Carrying Uniformly Load. Mechanics Based Design of Structures and Machines, 37(4), 462-474. https://doi.org/10.1080/15397730903124262
  8. Erdönmez, C., & İmrak, C. E. (2009). Modeling and numerical analysis of the wire strand. Journal of Naval Science and Engineering, 5(1), 30-38.

2008

  1. İmrak, C. E. (2008). Artificial Neural Networks Application in Duplex/Triplex Elevator Group Control System. Strojniski Vestnik Journal of Mechanical Engineering, 54(2), 103-114.
  2. Fetvacı, M., & İmrak, C. E. (2008). Asimetrik Evolvent Düz Dişli Çarkların Matematik Modellenmesi ve Alttan Kesme Analizi. Mühendis ve Makina, 49(583), 23-28.
  3. Fetvaci, M. C., & Imrak, C. E. (2008). Computerised cutting simulation of involute helical gears generated with rack cutters. International Journal of Design Engineering, 1(4), 445. https://doi.org/10.1504/IJDE.2008.024792
  4. Özdemirkıran, A., İmrak, C., & Fetvacı, M. (2008). Design for assembly and maintability in computer aided engineering and a case study: packagin. University Review, 2(4), 21-25.
  5. İmrak, C. E., & Gerdemeli, İ. (2008). Corrigendum: Determination of the Friction Coefficient of Groove Forms Using the Stress-Function Method. Strojniski Vestnik Journal of Mechanical Engineering, 54(2), 154.
  6. Erdoğan, M., & İmrak, C. (2008). Effects of the side walls on unsteady flow of a second grade fluid over a plane wall. International Journal of Non-Linear Mechanics, 43, 779-782. https://doi.org/10.1016/j.ijnonlinmec.2008.04.005
  7. Fetvacı, C., & İmrak, C. E. (2008). Generation Simulation of Helical Gear Drives by Rack Cutters With Asymmetric Teeth. University Review, Alexander Dubcek University of Trencín, 2(4), 12-16.
  8. Guria, M., Das, B. K., Jana, R. N., & İmrak, C. E. (2008). Hydromagnetic flow between two porous disks rotating about non-coincident axes. Acta Mechanica Sinica, 24(5), 489-496. https://doi.org/10.1007/s10409-008-0158-x
  9. Fetvaci, C., & Imrak, E. (2008). Mathematical Model of a Spur Gear with Asymmetric Involute Teeth and Its Cutting Simulation. Mechanics Based Design of Structures and Machines, 36(1), 34-46. https://doi.org/10.1080/15397730701735731
  10. Ünal, B., Gerdemeli, İ., & İmrak, C. (2008). Modelling and static stress analysis of shipyard jib crane with finite element method. University Review, Alexander Dubcek University of Trencín, 2(4), 7-11.
  11. Erdoğan, M. E., & İmrak, C. E. (2008). On the flow in a uniformly porous pipe. International Journal of Non-Linear Mechanics, 43(4), 292-301. https://doi.org/10.1016/j.ijnonlinmec.2007.12.006
  12. Erdoğan, M. E., & İmrak, C. E. (2008). Steady Flow of a Second-Grade Fluid in an Annulus with Porous Walls. Mathematical Problems in Engineering, 2008, 1-11. https://doi.org/10.1155/2008/867906
  13. Kerküklü, Y., Parlar, Z., Temiz, V., & İmrak, C. (2008). The Effects of the Shaft Surface Roughness on Performance of the Rotary Shaft Seals. University Review, 2(4), 16-20.

2007

  1. Imrak, C. E., & Gerdemeli, I. (2007). A numerical method for clamped thin rectangular plates carrying a uniformly distributed load. International Applied Mechanics, 43(6), 701-705. https://doi.org/10.1007/s10778-007-0069-8
  2. İmrak, C. E., & Gerdemeli, İ. (2007). An Exact Solution for the Deflection of a Clamped Rectangular Plate under Uniform Load. Applied Mathematical Sciences, 1(43), 2129-2137.
  3. Fetvacı, M., & İmrak, C. E. (2007). Asimetrik Evolvent Düz Dişli Çarkların Matematik Modellenmesi ve İmalat Simülasyonu. Sigma Mühendislik ve Fen Bilimleri Dergisi, 25(4), 329-337.
  4. İmrak, C. E., & Gerdemeli, İ. (2007). Determination of the Friction Coefficient of Groove Forms Using the Stress-Function Method. Strojniski Vestnik Journal of Mechanical Engineering, 53(1), 13-17.
  5. Fetvacı, M., & İmrak, C. E. (2007). Evolvent Düz Dişli Çarklarda Diş Kök Eğrilerinin İncelenmesi. Mühendis ve Makina, 48(570), 18-25.
  6. Fetvacı, M., & İmrak, C. (2007). Kremayer Takım ile Evolvent Düz Dişli İmalatının Bilgisayar Simülasyonu. Mühendis ve Makina, 48(572), 9-15.
  7. Erdoğan, M. E., & İmrak, C. E. (2007). On some unsteady flows of a non-Newtonian fluid. Applied Mathematical Modelling, 31(2), 170-180. https://doi.org/10.1016/j.apm.2005.08.019
  8. Erdoğan, M. E., & İmrak, C. E. (2007). On the comparison of the methods used for the solutions of the governing equation for unsteady unidirectional flows of second grade fluids. International Journal of Engineering Science, 45(9), 786-796. https://doi.org/10.1016/j.ijengsci.2007.05.005
  9. İmrak, C. E., & Gerdemeli, İ. (2007). On the shape factor for the maximum pressure of the undercut groove form. International Journal of Mathematical Analysis, 1(16), 783-790.
  10. Erdoğan, M. E., & İmrak, C. E. (2007). On the Steady Flow of a Second-Grade Fluid between Two Coaxial Porous Cylinders. Mathematical Problems in Engineering, 2007(42651), 1-11. https://doi.org/10.1155/2007/42651
  11. Erdoǧan, M., & İmrak, C. E. (2007). The Effects of the Side Walls on the Flow of a Second Grade Fluid in Ducts with Suction and Injection. International Journal of Non-Linear Mechanics, 42(5), 765-772. https://doi.org/10.1016/j.ijnonlinmec.2007.03.001
  12. İmrak, C. E., & Gerdemeli, I. (2007). The problem of isotropic rectangular plate with four clamped edges. Sadhana, 32(3), 181-186. https://doi.org/10.1007/s12046-007-0016-8
  13. İmrak, C., Erdil, A., & Fetvacı, M. (2007). Yarım daire yayılı yük altındak kren traversinin modellenmesi ve gerilme analizi. Sigma Mühendislik ve Fen Bilimleri Dergisi, 25(3), 297-305.
  14. Özkırım, M., & Durmuşoğlu, M. B. (2007). Dışsal Rota Esnekliğine Sahip Hücresel Üretim Sistemlerinin Benzetim Analizi. İTÜ Dergisi/D Mühendislik, 6(2), 41-52.

2006

  1. İmrak, C. E., & Özkırım, M. (2006). Determination of the Next Stopping Floor in Elevator Traffic Control by Means of Neural Networks. Istanbul University Journal of Electrical & Electronics Engineering, 6(1), 27-33.
  2. Erdoğan, M. E., & İmrak, C. E. (2006). On the Properties of a Special Function Defined by an Integral. Mathematical and Computational Applications, 11(1), 11-18. https://doi.org/10.3390/mca11010011
  3. Erdoğan, M., & Imrak, C. (2006). Corrigendum: The Effects of Duct Shape on the Nusselt Number. Mathematical and Computational Applications, 11(3), 235-235. https://doi.org/10.3390/mca11020235

2005

  1. Erdogan, M., & İmrak, C. E. (2005). An exact solution of the governing equation of a fluid of second-grade for three-dimensional vortex flow. International Journal of Engineering Science, 43(8-9), 721-729. https://doi.org/10.1016/j.ijengsci.2004.12.011
  2. Erdoğan, M. E., & İmrak, C. E. (2005). Diffusion of a line vortex in a second grade fluid embedded in a stagnation point flow. International Journal of Engineering Science, 43, 1257-1264. https://doi.org/10.1016/j.ijengsci.2005.05.006
  3. Fetvacı, M., & İmrak, C. (2005). Düz dişlilerde kavrama çevriminde gerilmelerin değişiminin sonlu eleman metodu ile incelenmesi. Mühendis ve Makina, 36(545), 19-25.
  4. Erdoğan, M. E., & İmrak, C. E. (2005). Effects of the side walls on starting flows in ducts. International Journal of Non-Linear Mechanics, 40, 103-111. https://doi.org/10.1016/j.ijnonlinmec.2004.05.015
  5. Erdoğan, M. E., & İmrak, C. E. (2005). On the axial flow of an incompressible viscous fluid in a pipe with a porous boundary. Acta Mechanica, 178(3-4), 187-197. https://doi.org/10.1007/s00707-005-0247-x
  6. Erdoğan, M. E., & İmrak, C. E. (2005). On the comparison of two different solutions in the form of series of the governing equation of an unsteady flow of a second grade fluid. International Journal of Non-Linear Mechanics, 40(4), 545-550. https://doi.org/10.1016/j.ijnonlinmec.2004.07.014
  7. Erdoğan, M. E., & İmrak, C. E. (2005). On unsteady unidirectional flows of a second grade fluid. International Journal of Non-Linear Mechanics, 40(10), 1238-1251. https://doi.org/10.1016/j.ijnonlinmec.2005.05.004
  8. Alkin, C., Imrak, C. E., & Kocabas, H. (2005). Solid Modeling and Finite Element Analysis of an Overhead Crane Bridge. Acta Polytechnica, 45(3), 61-67. https://doi.org/10.14311/712
  9. Erdoğan, M., & İmrak, C. E. (2005). The Effects of Duct Shape on the Nusselt Number. Mathematical and Computational Applications, 10(1), 79-88. https://doi.org/10.3390/mca10010079
  10. İmrak, C. E., Gerdemeli, İ., & Fetvacı, M. C. (2005). Yük kancasının eğri eksenli çubuk olarak gerilme analizi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 20(2), 217-223.

2004

  1. İmrak, C. E. (2004). Asansör Tesislerinde Koruyucu Bakım Esasları. Mühendis ve Makina, 45(536), 37-41.
  2. Fetvacı, M. C., & İmrak, C. E. (2004). Dişdibi gerilmelerinin analizi için düz dişli çarkların sonlu eleman modellenmesi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 19(2), 199-203. https://doi.org/https://izlik.org/JA69SC36UH
  3. Fetvacı, M., & İmrak, C. (2004). Düz dişli çark görsel materyallerinin bilgisayar ortamında elde edilmesi. Sigma Mühendislik ve Fen Bilimleri Dergisi, 2004(4), 201-208.
  4. Fetvacı, M., & İmrak, C. (2004). Düz dişli çarkların sonlu elemanlar metodu ile modellenmesi. Sigma Mühendislik ve Fen Bilimleri Dergisi, 2004(2), 46-54.
  5. Erdogan, M., & lmrak, C. (2004). Effect of the Side Walls on the Unsteady Flow in a Duct of Rectangular Cross-Section. Mathematical and Computational Applications, 9(3), 443-448. https://doi.org/10.3390/mca9030443
  6. Erdoǧan, M., & İmrak, C. (2004). Effects of the side walls on the unsteady flow of a second-grade fluid in a duct of uniform cross-section. International Journal of Non-Linear Mechanics, 39, 1379-1384. https://doi.org/10.1016/j.ijnonlinmec.2003.12.004
  7. Erdogan, M. E., & Imrak, C. E. (2004). Effects of the wall curvature on the flow in a duct of uniform cross-section. Acta Mechanica, 167, 123-130. https://doi.org/10.1007/s00707-003-0071-0
  8. Demirsöz, R., Fetvacı, M., & İmrak, C. (2004). Hidrolik asansörlerde kullanılan hidrolik ünitesinin seçim ve dizayn hesap esasları. Mühendis ve Makina, 45(534), 27-38.
  9. Fetvacı, M., İmrak, C., & Kesikçi, M. (2004). Kalın cidarlı borularda sınır eleman ve sonlu eleman metodlarının uygulanması. Sigma Mühendislik ve Fen Bilimleri Dergisi, 2004(2), 74-81.
  10. İmrak, C. (2004). Krenlerin (vinçlerin) periyodik koruyucu bakım esasları. Mühendis ve Makina, 45(538), 34-40.
  11. Bolat, B., Erol, K., & İmrak, C. (2004). Mühendislik uygulamalarında genetik algoritmalar ve operatörlerin işlevleri. Sigma Mühendislik ve Fen Bilimleri Dergisi, 2004(4), 264-281.
  12. İmrak, C., & Özkırım, M. (2004). Neural networks application in the next stopping floor problem of elevator systems. Sigma Mühendislik ve Fen Bilimleri Dergisi, 2004(1), 28-37.
  13. Erdogan, M., & İmrak, C. E. (2004). On the Unsteady Flows Generated by Impulsive Motion of a Boundary. Mathematical and Computational Applications, 9(2), 265-274. https://doi.org/10.3390/mca9020265
  14. Uzuner, F., & Gediktaş, M. (2004). Salınım hareketi yapan radyal kaymalı plastik yataklarda sürtünme. İTÜ Dergisi / D - Mühendislik Serisi, 3(6), 91-98.
  15. Kesikçi, M., Fetvacı, M., & İmrak, C. E. (2004). Stress Distribution of the Chain Link by means of Boundary Element and Finite Element Methods. Sigma Journal of Engineering and Natural Sciences, 2004(4), 255-263.
  16. İmrak, C., & Fetvacı, M. (2004). Yukarı yönde asansör trafiği ve performans hesabı. Mühendis ve Makina, 45(531), 18-25.
  17. Gerdemeli, İ., İmrak, C. E., & Özkırım, M. (2004). The Critical Velocities of the Free Transverse Vibrations of Moving Conveyor Belts. Mechanical Engineering & Electrical Engineering - Scientific Issue, 9, 69-73.
  18. Gerdemeli, İ., İmrak, C. E., & Kesikçi, K. (2004). Two Dimensional Modeling and Stress Analysis of Engineering Structures for Boundary Element Analysis. Mechanical Engineering & Electrical Engineering - Scientific Issue, 7-8, 79-82.

2003

  1. İmrak, C. E., & Fetvacı, M. (2003). Asansörlerde acil kurtarma sistemleri ve güç kaynaklarının belirlenmesi. Mühendis ve Makina, 44(524), 19-25.
  2. Fetvacı, M., & İmrak, C. (2003). Bilgisayar desteği ile dişli çark görsel materyallerinin elde edilmesi. Mühendis ve Makina, 44(524), 48-51.
  3. Bolat, B., & İmrak, C. (2003). Klasik asansör kontrol sistemleri ve optimum trafik kontrollu sistemlerindeki gelişmeler. Yıldız Teknik Üniversitesi Dergisi, 2003(3), 24-32.
  4. Erdoǧan, M. (2003). On the flows produced by sudden application of a constant pressure gradient or by impulsive motion of a boundary. International Journal of Non-Linear Mechanics, 38(5), 781-797. https://doi.org/10.1016/S0020-7462(01)00133-0
  5. Erdoğan, M. E. (2003). On Unsteady Motions of a Second-order Fluid over a Plane Wall. International Journal of Non-Linear Mechanics, 38, 1045-1051.

2000

  1. İmrak, C. E. (2000). Asansör Tesislerinde Bakım Yöntemleri. Mühendis ve Makina, 41(480), 37-41.
  2. İmrak, C. E., & Gerdemeli, I. (2000). Bantlı konveyörlerin bilgisayar yardımıyla simülasyonu. Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 13(3), 681-696.

1999

  1. İmrak, C. E. (1999). Airy Gerilme Fonksiyonu ve Yiv Formuna Uygulanması. Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 12(4), 1013-1025.
  2. İmrak, C., & Gerdemeli, İ. (1999). Bilgisayar destekli asansör tahrik grubu tasarımı – I. Niğde Üniversitesi Mühendislik Bilimleri Dergisi, 3(2), 35-50.
  3. İmrak, C., & Gerdemeli, I. (1999). Bilgisayar destekli asansör tahrik grubu tasarımı – II. Niğde Üniversitesi Mühendislik Bilimleri Dergisi, 3(2), 51-68.
  4. İmrak, C. (1999). Bilgisayar destekli tasarımda sentetik eğriler ve kanca çizimi. Yıldız Teknik Üniversitesi Dergisi(4), 213-222.
  5. İmrak, C. (1999). Computer aided design and its place in machine design. Yıldız Teknik Üniversitesi Dergisi(4), 230-239.
  6. İmrak, C. E. (1999). Kapalı mekanlarda insan trafiği ve asansör trafik hesabı. Mühendis ve Makina, 40(474), 21-25.

1998

  1. İmrak, C. E. (1998). Yapay sinir ağları ve asansör kontrolüne uygulanması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 13(1-2), 17-28.

1997

  1. Aslan, R. (1997). Bantlı Konveyörlerin Bilgisayar Yardımıyla Tasarımı. Mühendis ve Makina, 37(434), 21-24.
  2. İmrak, C. (1997). Makina konstrüksiyonu ve bilgisayar destekli tasarım. Gazi Üniversitesi Mimarlık Mühendislik Fakültesi Dergisi, 12(1), 37-46.

1993

  1. İmrak, C., & Fetvacı, M. (1993). Makina parçalarının yorulma dayanımını artık gerilemeler yardımıyla arttırma. Mühendis ve Makina, 34(403), 26-31.

1992

  1. Aslan, R., Gerdemeli, İ., & Vural, M. (1992). Transport Sistemlerinde Kullanılan Halatların Ömrü ve Muayenesi. Mühendis ve Makina, 33(389), 37-41.

1990

  1. Arıtan, T. (1990). Asansörler. İNŞAAT Malzemeleri ve Uygulamaları Dergisi, 37, 24-28.

1983

  1. Arıtan, T. (1983). Asansör Üretiminde Tarihsel Gelişme. Kaynak Dergisi, 16, 14-16.
  2. Arıtan, T. (1983). Asansör arızaları, kazalar ve alınabilecek önlemler. Kaynak Dergisi, 16-48.

1977

  1. Öztepe, H. (1977). Stability of Rings, Archs, Shells and Tubes Under External Pressure. Sakarya D.M.M Akademisi Dergisi, 2(MMA-1), 19-27.

1971

  1. Köktürk, U. (1971). Kaldırma Makinalarının Statik Hesaplarıyla İlgili Prensipler. Mühendis ve Makina, 14(165), 243-256.

1968

  1. Dosdoğru, G. (1968). Kaldırma Makinalarında Korunma Tedbirleri. Mühendis ve Makina, 11(131), 367-369.

1960

  1. Dosdoğru, G. (1960). Portalgestaltungen, Portaldeformationen und Raddrücke moderner Hafenkrane (Modern liman krenlerinin portal şekillendirmeleri, portal deformasyonları ve tekerlek yükleri). Bulletin of The Technical University of Istanbul, 13, 81-116.