Uluslararası Makaleler

Science Citation Index (SCI) - Science Citation Index Expanded (SCIE)

2022

T. Şahin, C. E. İmrak, A. Çakır, A. Candaş, "Evolved model for early fault detection and health tracking in marine diesel engine by means of machine learning techniques", Pomorstvo, 36(1), pp. 95-104. doi.org/10.31217/p.36.1.11
E. Kalay, M. E. Boğoçlu, B. Bolat, "Mass flow rate prediction of screw conveyor using artificial neural network method", Powder Technology, 408, 117757. doi.org/10.1016/j.powtec.2022.117757

2021

A.Candaş, E.Oterkus, C.E.İmrak, "Peridynamic simulation of dynamic fracture in functionally graded materials subjected to impact load", Engineering with computers, (Article in press). doi.org/10.1007/s00366-021-01540-2

A.Candaş, E.Oterkus, C.E.İmrak, "Dynamic Crack Propagation and Its Interaction With Micro-Cracks in an Impact Problem", Journal of Engineering Materials and Technology, Transactions of ASME, 143(1), doi.org/10.1115/1.4047746

2020

Ö.Salman, C.E.İmrak, "Experimental investigation of corrosion effect on bending fatigue of the wire ropes", Indian Journal of Engineering and Materials Sciences, 27(3), 770-775.

2017

Y.A.Onur, C.E.İmrak, T.Ö. Onur, ‘’ Investigation on bending over sheave fatigue life determination of rotation resistant steel wire rope’’, Experimental Techniques, Vol. 41 No.5, 2017, pp. 475-482.
Y.A. Onur, C.E.İmrak, ‘’Discard fatigue life of stranded steel wire rope subjected to bending over sheave fatigue’’, Mechanics & Industry, Vol.18 No.2, 2017, pp.1-7

2014

M.Altuntaş, Ö.Salman, C.E.İmrak, ‘’Experimental Stress Analysis of Elevator Guiding Equipment’’, Advanced Design & Manufacturing V, Vol. 572, 2014, pp. 177-180.

2013

Y.A.Onur, C.E.İmrak, “Experimental determination of degradation influence on bending over sheave fatigue life of steel wire wopes”, Indian Journal of Engineering & Materials Sciences, Vol 20, No.1, 2013, pp.14-20.

2012

Y.A.Onur, C.E.İmrak, “Experimental and theoretical investigation of bending over sheave fatigue life of stranded steel wire rope”, Indian Journal of Engineering & Materials Sciences, Vol.19, No.3, 2012, pp.189-195.
Y.A.Onur, C.E.İmrak, “Reliability analysis of elevator car frame using analytical and finite element methods”, Building Serv. Eng. Res. Technol., Vol 33, No.3, 2012, pp.293-305

2011

C.Erdönmez, C.E.İmrak, “New Approaches for Model Generation and Analysis for Wire Rope”, Lecture Notes in Computer Science (Computational Science and Its Applications - ICCSA 2011 ), LNCS Part 4, Vol. 6785/2011, 2011, pp. 103-111.
C.Erdönmez, C.E.İmrak, “A finite element model for independent wire rope core with double helical geometry subjected to axial loads”, Sadhana - Academy Proc. in Engineering Sciences, Vol. 36, No.6, 2011, pp. 995-1008.
C. Erdönmez, C. E. İmrak, Modeling techniques of nested helical structure based geometry for numerical analysis, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 57, No 4, 2011, pp. 283-292.
Y. A. Onur, C. E. İmrak, The influence of rotation speed on the bending fatique lifetime of steel wire ropes, Proc. IMech E Part C: J. Mechanical Engineering Science, Vol. 225, No. 3, 2011, pp. 520-52.
M. E. Erdoğan, C. E. İmrak, Flow due to noncoaxial rotation of a porous disk and a second grade fluid rotating at infinity, Int J of Non-Linear Mech., Vol.46, No.7, 2011, pp. 986-989.

2010

C. E. İmrak, C. Erdönmez, On the problem of wire rope model generation with axial loading, Mathematical & Computational Applications, Vol. 2010, No.2, pp. 259-268.
M. E. Erdoğan, C. E. İmrak, Steady circulatory flow of a second grade fluid about a rotating porous cylinder, Int J of Engineering Science, Vol. 48, No.11, 2010, pp. 1225-1232.

2009

M. E. Erdoğan, C. E. İmrak, An analytical solution of the Navier-Stokes equation for flow over a moving plate bounded by two side walls, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 55, No 12, 2009, pp. 749-754.
C. E. İmrak, C.Fetvacı, The deflection solution of a clamped rectangular thin-plate carrying uniformly load, Mechanics Based Design of Structures & Machines, Vol. 37, No 4, 2009, pp. 462-474.
M. E. Erdoğan, C. E. İmrak, Some effects of side walls on unsteady flow of a viscous fluid over a plane wall, Math. Probl. in Eng., Vol. 2009, 2009, Article Number: 725196/
M. E. Erdoğan, C. E. İmrak, On the comparison of the solutions obtained by using two different transform methods for the second problem of Stokes for Newtonian fluids, Int J of Non-Linear Mech., Vol.44, No.1, 2009, pp. 27-30.

2008

M. Guria, B. K. Das, R. N. Jana, C. E. İmrak, Hydromagnetic flow between two porous disks rotating about non-coincident axes, Acta Mechanica Sinica, Vol.24, No.5, 2008, pp. 489-496.
M. E. Erdoğan, C. E. İmrak, Effects of the side walls on unsteady flow of a second grade fluid over a plane wall, Int J of Non-Linear Mech., Vol.43 No.8, 2008, pp. 779-782.
C. E. İmrak, İ. Gerdemeli, Determination of the friction coefficient of groove forms using the stress-function method, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 54, No 2, 2008, p. 154.
M. E. Erdoğan, C. E. İmrak, On the flow in a uniformly porous pipe, Int J of Non-Linear Mech., Vol.43 No.4 , 2008, pp.2 92-301.
M. E. Erdoğan, C. E. İmrak, Steady flow of a second grade fluid in an annulus with porous walls, Math. Probl. in Eng., Vol.2008, 2008, Article Number: 867906 .
C. E. İmrak, Artificial Neural Networks Application in Duplex/Triplex Elevator Control System, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 54, No 2, 2008, pp. 103-114.
M. C. Fetvacı, C. E. İmrak, Mathematical model of a spur gear with asymmetric involute teeth and its cutting simulation, Mechanics Based Design of Structures & Machines, Vol. 36, No 1, 2008, pp. 34-46.

2007

C. Erdönmez, C. E. İmrak, General nonlinear equilibrium equation solution of the straight wire strand, AIP CONFERENCE PROCEEDINGS, Vol. 936, 2007, pp. 174-177.
C. E. İmrak, İ. Gerdemeli, Determination of the friction coefficient of groove forms using the stress-function method, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 53, No 1, 2007, pp. 13-17.
C. E. İmrak, İ. Gerdemeli, The problem of clamped isotropic rectangular plate with four clamped edges, Sadhana - Academy Proc. in Engineering Sciences, Vol. 32, No.3, 2007, pp. 181-186.
C. E. İmrak, İ. Gerdemeli, A numerical method for clamped thin rectangular plates carrying a uniformly distributed load, International Applied Mechanics, Vol. 43, No.6, 2007, pp. 701 -705.
M. E. Erdoğan, C. E. İmrak, On the steady flow of a second-grade fluid between two coaxial porous cylinders, Math. Probl. in Eng., Vol. 2007, 2007, Article Number: 42651.
M. E. Erdoğan, C. E. İmrak, On the comparison of the methods used for the solutions of the governing equation for unsteady unidirectional flows of second grade fluids, Int J of Engineering Science, Vol 45, No.9, 2007, pp. 786-796.
M. E. Erdoğan, C. E. İmrak, The effects of the side walls on the flow of a second grade fluid in ducts with suction and injection, Int J of Non-Linear Mech., Vol.42 No.5 , 2007, pp.765-772.
M. E. Erdoğan and C. E. İmrak, On some unsteady flows of a non-Newtonian fluid, Applied Mathematical Modelling, Vol 31, No. 2, 2007, pp. 170– 180 .

2005

M. E. Erdoğan, C. E. İmrak, Effects of the side walls on starting flows in ducts, Int J of Non-Linear Mech., Vol.40 No.1, 2005, pp. 103-111.
M. E. Erdoğan, C. E. İmrak, On the comparison of two different solutions in the form of series of the governing equation of an unsteady flow of a second grade fluid, Int J of Non-Linear Mech., Vol.40 No.4, 2005, pp. 545-550.
M. E. Erdoğan, C. E. İmrak, An exact solution of the governing equation of a fluid of second-grade for three-dimensional vortex flow, Int J of Engineering Science, Vol 43, No.8-9, 2005, pp. 721-729.
M. E. Erdoğan, C. E. İmrak, On the axial flow of an incompressible viscous fluid in a pipe with a porous boundary, Acta Mechanica, Vol 178, No 3-4, 2005, pp. 187-197.
M. E. Erdoğan, C. E. İmrak, On unsteady unidirectional flows of a second grade fluid,Int J of Non-Linear Mech., Vol. 40, No. 10, 2005, pp. 1238-1251.
M. E. Erdoğan, C. E. İmrak, Diffusion of a line vortex in a second grade fluid embedded in a stagnation point flow, Int J of Engineering Science, Vol 43, No.15-16, 2005, pp. 1257-1264.

2004

M. E. Erdoğan, C. E. İmrak, Effects of the side walls on the unsteady flow of a second grade fluid in a duct of uniform cross-section, Int J of Non-Linear Mech., Vol.39, No.8, 2004, pp. 1379-1384.
M. E. Erdoğan, C. E. İmrak, Effects of the Wall Curvature on the Flow in a Duct of Uniform Cross-Section, Acta Mechanica, Vol.167, No.3-4, 2004, pp. 123-130.

Uluslararası Makaleler - Engineering Index

2016

Y.A.Onur, C.E.İmrak, T.Ö.Onur, ‘’Investigation of Bending Over Sheave Fatigue Life of Stranded Steel Wire Rope By Artificial Neural Networks’’, Int. J. of Mechanical & Production Eng., Vol. 4, No.9, 2016, pp. 47-49.

2014

M.Altuntaş, Ö. Salman , C.E.İmrak, “Experimental Stress Analysis of Elevator Guiding Equipment”, Key Engineering Materials, Vol. 572, 2014, pp.177-180.

2013

C.E.İmrak “A Survey on the effects of the 2011 Van, Turkey, earthquakes on elevators”, Elevator-World India, Vol. 6, No.1, 2013, pp.34-39.

2011

S.Koç, C.E.İmrak, S.Targıt, “Design parameters and stress analysis of elevator guide rail brackets”, Elevator-World, Vol. LIX, No.6, June 2011, pp.96-103.tact analysis using finite elements, Key Engineering Materials, Vol. 450, 2011, pp. 115-118.
C.Erdönmez, C.E.İmrak, “Wire Strand and IWRC Modeling and Contact Analysis using Finite Elements,” Key Engineering Materials, Vol. 450, 2011, pp.115-118.

C. Fetvacı, C. E. İmrak, Computer modeling and simulation of spur gears by generating method, Key Engineering Materials, Vol. 450, 2011, pp. 103-106.
C. Erdönmez, C. E. İmrak, Wire strand and IWRC modeling and contact analysis using finite elements, Key Engineering Materials, Vol. 450, 2011, pp. 115-118.
İ. Gerdemeli, I. Esen, D.Özer, Dynamic response of an overhead crane beam due to a moving mass using moving finite element approximation, Key Engineering Materials, Vol. 450, 2011, pp. 99-102.
İ. Gerdemeli, C. Fetvacı, E. Kayaoğlu, Design for assembly in concurrent engineering a case study on its application : glass block holder and glass mold, Key Engineering Materials, Vol. 450, 2011, pp. 141-144.

2006

C. E. İmrak, M. Özkırım, Determination of the Next Stopping Floor in Elevator Traffic Control by Means of Neural Networks, Journal of Electrical & Electronics Engineering, Vol.6, No.1, 2006, pp. 27-33.
M. E. Erdoğan, C. E. İmrak, On the Properties of a Special Function Defined by Integral, Math. & Comp. Application, Vol.11 No:1 2006, pp. 11-18.

2005

C. E. İmrak, M. C. Fetvacı, İ. Gerdemeli, Yük Kancasının Eğri Eksenli Çubuk Olarak Gerilme Analizi Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.20, No. 2, 2005, pp. 217-223.
M. E. Erdoğan, C. E. İmrak, The Effects of Duct Shape on the Nusselt Number, Math. & Comp. Application, Vol.10, No:1 2005, pp. 79-88.

2004

M. E. Erdoğan, C. E. İmrak, Effect of the side walls on the unsteady flow in a duct of rectangular cross-section, Math. & Comp. Application, Vol.9 No:3 2004, pp.443-448.
M. C. Fetvacı, C. E. İmrak, Dişdibi Gerilmelerinin Analizi İçin Düz Dişli Çarkların Sonlu Eleman Modellenmesi, Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.19, No.2, June, 2004, pp 199-203.
C. E. İmrak, M. Özkırım, H. Uzunoğlu, Condition Monitoring of Lift Gear Boxes By Means of Sound Analysis, Proceedings of the 7^th Biennal Conference on Engineering Systems Design and Analysis - 2004, Vol.3, 2004, pp 115 - 118.
M. E. Erdoğan, C. E. İmrak, On the Unsteady Flows Generated By Impulsive Motion of A Boundary, Math. & Comp. Application, Vol.9 No: 2, 2004, pp. 265-274.

2001

C. E. İmrak, M. Özkırım, Preventive and Planned Maintenance of Elevator Installations, Elevator-World, Vol.49, No.6, Haziran 2001, pp. 116-122.
C. E. İmrak, G.C. Barney, The Application of Neural Networks to Lift Traffic Control,Elevator-World, Vol.49, No.5, Mayıs 2001, pp. 82.

1998

C. E. İmrak,Yapay Sinir Ağları ve Asansör Kontrolüne Uygulaması, Gazi Üniversitesi, Mimarlık-Mühendislik Fakültesi Dergisi, Cilt 13 Sayı 1-2, Aralık 1998, pp. 17-28.

Hakemli Uluslararası Makaleler

2013

C.E.İmrak, “A Survey on the Effects of the 2011 Van, Turkey, Earthquakes on Elevators”, Elevator World India, Vol. 6, No.1, 2013, pp.34-39.

2012

Y.E.İmrak, “The effects of the Van Earthquakes on lifts”, Elevatori, Vol. 41, No.6, 2012, pp.44-65.
M.Kocaman, C.E.İmrak, “Design Optimisation of Elevator Car for Double-Deck System”, International Virtual Journal Machines, technologies, materials, Vol.6 No.8, 2012, pp.37-40

2011

S.Koç, C.E.İmrak, S.Targıt, “Design parameters and stress analysis of elevator guide rail brackets”, Elevation, Vol. 2011/03, No.68, 2011, pp.80-93.
C.Erdönmez, C.E.İmrak, “Advances in 3D wire rope modeling and numerical analysis”, The Int. J. of Transport & Logistics, Vol. 11, No.17, 2010, pp.57-62.
Y.A.Onur, C.E.İmrak, “Strain measurement of stranded rope subjected to bending over sheave fatigue”, The Int. J. of Transport & Logistics, Vol. 11, No.17, 2010, pp.146-149

2010

C. E. İmrak, Corrosion and its impact on lift components, Elevatori, Vol. 59, No.2, 2010 pp. 58-70.

2009

Y. A. Onur, C. E. İmrak, Computer aided car frame modeling and stress analysis, Elevatori, Vol.39, No.5, 2009, pp. 88-97.
C. E. İmrak, Ö. Salman, An application of reverse engineering in concurrent engineering, Transactions of the VSB- Technical University of Ostrava Metallurgical Series, Vol.52, No.3, 2009, pp. 85-90.
C. Erdönmez, C. E. İmrak, Modeling and numerical analysis of the wire strand,Journal of Naval Science and Engineering, Vol. 5, No.12, 2009, pp. 30-38.
M. C. Fetvacı, C. E. İmrak, Computerized cutting simulation of involute helical gears generated with rack cutters Int. J. Design Engineering, Vol.1, No.4, 2009, pp.445- 452.
C. E. İmrak, İ. Gerdemeli, On the solution of the deflections of thin clamped rectangular plates with a distributed load, Adv. In Math. Sci. Jour (AMSJ), Vol.2009, No.2, 2009, pp. 1-15.
C. E. İmrak, İ.Gerdemeli, Application of the Airy’s stress function to determine friction and maximum pressure coefficients in undercut grooves, Adv. in Math. Sci. Jour (AMSJ), Vol. 2009, No.1, 2009, pp. 1-11.

2008

B. Ünal, İ. Gerdemeli, C. E. İmrak, Modeling and Static Stress Analysis of Shipyard Jib Crane with Finite Element Method, University Review, Vol. 2, No. 4, 2008, pp.7-11.,
M .C. Fetvacı, C. E. İmrak, Generation Simulation of Helical Gear Drives by Rack Cutters with Asymmetric Teeth, University Review, Vol. 2, No. 4, 2008, pp. 12-16.
Y. Kerküklü, Z. Parlar, V. Temiz, C. E. İmrak, The Effects of the Shaft Surface Roughness on Performance of the Rotary Shaft Seals, University Review, Vol. 2, No. 4, 2008, pp. 16-20.
A. Özdemirkıran, C. E. İmrak, M. C. Fetvacı, Design for Assembly and Maintability in Computer Aided Engineering and A Case Study: Packaging, University Review, Vol. 2, No. 4, 2008, pp. 21-25.
C. E. İmrak, Accessible Europe 2010, Elevatori, Vol.57, No.1, 2008.
C. E. İmrak, AYSAD becomes full member of ELA, Elevatori, Vol. 57, No.4, 2008.
C. E. İmrak, E. Bozdağ, E. Sünbüloğlu, T. Toprak, S. Targıt, Experimental Stress Analysis of Guide Rails, Elevatori, Vol. 57, No. 8, 2008.

2007

C. E. İmrak, İ. Gerdemeli, On the shape Factor for the Maximum Pressure of the Undercut Groove Form, Int. Journal of Math. Analysis, Vol.1, No.16, 2007, pp.783-790.
C. E. İmrak, İ. Gerdemeli, An Exact Solution for the Deflection of a Clamped Rectangular Plate under Uniform Load, Applied Mathematical Sciences, Vol.1, No.43, 2007, pp.2129-2137.
S. Kurt, İ. Gerdemeli, S. Dikmen, Istanbul, New Trends for Elevators and Building,Elevatori, Vol.36, No.3, 2007

2006

M. K. Kesikçi, İ. Gerdemeli, C. E. İmrak, Stress Analysis of Roller Chain Links, Elevatori, Vol.35, No.3, 2006, pp. 48-61.

2005

C. Alkın, C. E. İmrak , H. Kocabaş, Solid Modeling and Finite Element Analysis of an Overhead Crane Bridge, Acta Polytechnica, Vol. 45, No.3/2005, pp. 61-67.

2004

İ. Gerdemeli, C. E. İmrak, M. C. Fetvacı, M. K. Kesikçi, Two Dimensional Modeling and Stress Analysis of Engineering Structures for Boundary Element Analysis, MashininTelekt, Year LII, No: 7-8, 2004, pp. 79-82.
İ. Gerdemeli, C. E. İmrak, M. Özkırım, The Critical Velocities of The Free Transverse Vibrations of Moving Conveyor Belts, MashininTelekt, Year LII, No. 9, 2004, pp. 69-73
C. E. İmrak, M. Özkırım, The Pressure Distribution in Undercut Grooves, Elevatori, Vol. 33, No. 2, 2004, pp. 24-35.

2002

C. E. İmrak, M. Özkırım, Preventive and Planned Maintenance of Elevators, Elevatori, Vol. 31, No.2/2002, s. 30-44.

2001

C. E. İmrak, M. Özkırım, Structures and Selection of Wire Ropes for Elevators, Elevatori, Vol. 30, No.3/2001, s.44-55.

2000

C. E. İmrak, G. C. Barney, Application of Neural Networks to Traffic Control, Elevatori, Vol. 29, No.2, 2000, pp.17-27.
C. E. İmrak, G. C. Barney, Verkehrsregelung über neuronale Netzwerke, LIFT-REPORT, Vol. 26, No.2, Mart/Nisan 2000, pp.28-37.

1999

C. E. İmrak, M. Özkırım, Türkei: Grundlagen der vorbeugenden Wartung, LIFT-REPORT, Vol. 25, No. 5, Eylül/Ekim 1999, pp.38-46.

1998

C. E. İmrakVergleich des Rillenfaktors und des Reibungsbeiwertes der Treibscheiben-Seilrille, LIFT-REPORT, Vol.24, No.2, Mart/Nisan 1998, pp.95-97.

1997

G. C. Barney, C. E. İmrak, Neural Networks and Traffic Control Systems, Elevatori, Vol. 26, No. 5, 1997, pp.75-85.