Uluslararası Makaleler

Science Citation Index (SCI) - Science Citation Index Expanded (SCIE)

2017

  • Y.A.Onur, C.E.İmrak, T.Ö. Onur, ‘’ Investigation on bending over sheave fatigue life determination of rotation resistant steel wire rope’’, Experimental Techniques, Vol. 41 No.5, 2017, pp. 475-482.
  • Y.A. Onur, C.E.İmrak, ‘’Discard fatigue life of stranded steel wire rope subjected to bending over sheave fatigue’’, Mechanics & Industry, Vol.18  No.2, 2017, pp.1-7

2014

  • M.Altuntaş, Ö.Salman, C.E.İmrak, ‘’Experimental Stress Analysis of Elevator Guiding Equipment’’, Advanced Design & Manufacturing V, Vol. 572, 2014, pp. 177-180.

2013

  • Y.A.Onur, C.E.İmrak, “Experimental determination of degradation influence on bending over sheave fatigue life of steel wire wopes”, Indian Journal of Engineering & Materials Sciences, Vol 20, No.1, 2013, pp.14-20.

2012

  • Y.A.Onur, C.E.İmrak, “Experimental and theoretical investigation of bending over sheave fatigue life of stranded steel wire rope”, Indian Journal of Engineering & Materials Sciences, Vol.19, No.3, 2012, pp.189-195.
  • Y.A.Onur, C.E.İmrak, “Reliability analysis of elevator car frame using analytical and finite element methods”, Building Serv. Eng. Res. Technol., Vol 33, No.3, 2012, pp.293-305

2011

  • C.Erdönmez, C.E.İmrak, “New Approaches for Model Generation and Analysis for Wire Rope”, Lecture Notes in Computer Science (Computational Science and Its Applications - ICCSA 2011 ), LNCS Part 4, Vol. 6785/2011, 2011, pp. 103-111.
  • C.Erdönmez, C.E.İmrak, “A finite element model for independent wire rope core with double helical geometry subjected to axial loads”, Sadhana - Academy Proc. in Engineering Sciences, Vol. 36, No.6, 2011, pp. 995-1008.
  • C. Erdönmez, C. E. İmrak, Modeling techniques of nested helical structure based geometry for numerical analysis, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 57, No 4, 2011, pp. 283-292.
  • Y. A. Onur, C. E. İmrak, The influence of rotation speed on the bending fatique lifetime of steel wire ropes, Proc. IMech E Part C: J. Mechanical Engineering Science, Vol. 225, No. 3, 2011, pp. 520-52.
  • M. E. Erdoğan, C. E. İmrak, Flow due to noncoaxial rotation of a porous disk and a second grade fluid rotating at infinity, Int J of Non-Linear Mech., Vol.46, No.7, 2011, pp. 986-989.

2010

  • C. E. İmrak, C. Erdönmez, On the problem of wire rope model generation with axial loading, Mathematical & Computational Applications, Vol. 2010, No.2, pp. 259-268.
  • M. E. Erdoğan, C. E. İmrak, Steady circulatory flow of a second grade fluid about a rotating porous cylinder, Int J of Engineering Science, Vol. 48, No.11, 2010, pp. 1225-1232.

2009

  • M. E. Erdoğan, C. E. İmrak, An analytical solution of the Navier-Stokes equation for flow over a moving plate bounded by two side walls, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 55, No 12, 2009, pp. 749-754.
  • C. E. İmrak, C.Fetvacı, The deflection solution of a clamped rectangular thin-plate carrying uniformly load, Mechanics Based Design of Structures & Machines, Vol. 37, No 4, 2009, pp. 462-474.
  • M. E. Erdoğan, C. E. İmrak, Some effects of side walls on unsteady flow of a viscous fluid over a plane wall, Math. Probl. in Eng., Vol. 2009, 2009, Article Number: 725196/
  • M. E. Erdoğan, C. E. İmrak, On the comparison of the solutions obtained by using two different transform methods for the second problem of Stokes for Newtonian fluids, Int J of Non-Linear Mech., Vol.44, No.1, 2009, pp. 27-30.

2008

  • M. Guria, B. K. Das, R. N. Jana, C. E. İmrak, Hydromagnetic flow between two porous disks rotating about non-coincident axes, Acta Mechanica Sinica, Vol.24, No.5, 2008, pp. 489-496.
  • M. E. Erdoğan, C. E. İmrak, Effects of the side walls on unsteady flow of a second grade fluid over a plane wall, Int J of Non-Linear Mech., Vol.43 No.8, 2008, pp. 779-782.
  • C. E. İmrak, İ. Gerdemeli, Determination of the friction coefficient of groove forms using the stress-function method, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 54, No 2, 2008, p. 154.
  • M. E. Erdoğan, C. E. İmrak, On the flow in a uniformly porous pipe, Int J of Non-Linear Mech., Vol.43 No.4 , 2008, pp.2 92-301.
  • M. E. Erdoğan, C. E. İmrak, Steady flow of a second grade fluid in an annulus with porous walls, Math. Probl. in Eng., Vol.2008, 2008, Article Number: 867906 .
  • C. E. İmrak, Artificial Neural Networks Application in Duplex/Triplex Elevator Control System, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 54, No 2, 2008, pp. 103-114.
  • M. C. Fetvacı, C. E. İmrak, Mathematical model of a spur gear with asymmetric involute teeth and its cutting simulation, Mechanics Based Design of Structures & Machines, Vol. 36, No 1, 2008, pp. 34-46.

2007

  • C. Erdönmez, C. E. İmrak, General nonlinear equilibrium equation solution of the straight wire strand, AIP CONFERENCE PROCEEDINGS, Vol. 936, 2007, pp. 174-177.
  • C. E. İmrak, İ. Gerdemeli, Determination of the friction coefficient of groove forms using the stress-function method, Strojniski Vestnik Journal of Mechanical Engineering, Vol. 53, No 1, 2007, pp. 13-17.
  • C. E. İmrak, İ. Gerdemeli, The problem of clamped isotropic rectangular plate with four clamped edges, Sadhana - Academy Proc. in Engineering Sciences, Vol. 32, No.3, 2007, pp. 181-186.
  • C. E. İmrak, İ. Gerdemeli, A numerical method for clamped thin rectangular plates carrying a uniformly distributed load, International Applied Mechanics, Vol. 43, No.6, 2007, pp. 701 -705.
  • M. E. Erdoğan,  C. E. İmrak, On the steady flow of a second-grade fluid between two coaxial porous cylinders, Math. Probl. in Eng., Vol. 2007, 2007, Article Number: 42651.
  • M. E. Erdoğan, C. E. İmrak, On the comparison of the methods used for the solutions of the governing equation for unsteady unidirectional flows of second grade fluids, Int J of Engineering Science, Vol 45, No.9, 2007, pp. 786-796.
  • M. E. Erdoğan, C. E. İmrak, The effects of the side walls on the flow of a second grade fluid in ducts with suction and injection, Int J of Non-Linear Mech., Vol.42 No.5 , 2007, pp.765-772.
  • M. E. Erdoğan and C. E. İmrak, On some unsteady flows of a non-Newtonian fluid, Applied Mathematical Modelling, Vol 31, No. 2, 2007, pp. 170– 180 .

2005

  • M. E. Erdoğan, C. E. İmrak, Effects of the side walls on starting flows in ducts, Int J of Non-Linear Mech., Vol.40 No.1, 2005, pp. 103-111.
  • M. E. Erdoğan, C. E. İmrak, On the comparison of two different solutions in the form of series of the governing equation of an unsteady flow of a second grade fluid, Int J of Non-Linear Mech., Vol.40 No.4, 2005, pp. 545-550.
  • M. E. Erdoğan, C. E. İmrak, An exact solution of the governing equation of a fluid of second-grade for three-dimensional vortex flow, Int J of Engineering Science, Vol 43, No.8-9, 2005, pp. 721-729.
  • M. E. Erdoğan, C. E. İmrak, On the axial flow of an incompressible viscous fluid in a pipe with a porous boundary, Acta Mechanica, Vol 178, No 3-4, 2005, pp. 187-197.
  • M. E. Erdoğan,  C. E. İmrak, On unsteady unidirectional flows of a second grade fluid,Int J of Non-Linear Mech., Vol. 40, No. 10, 2005, pp. 1238-1251.
  • M. E. Erdoğan, C. E. İmrak, Diffusion of a line vortex in a second grade fluid embedded in a stagnation point flow,  Int J of Engineering Science, Vol 43, No.15-16, 2005, pp. 1257-1264.

2004

  • M. E. Erdoğan,  C. E. İmrak, Effects of the side walls on the unsteady flow of a second grade fluid in a duct of uniform cross-section, Int J of Non-Linear Mech., Vol.39, No.8, 2004, pp. 1379-1384.
  • M. E. Erdoğan, C. E. İmrak, Effects of the Wall Curvature on the Flow in a Duct of Uniform Cross-Section, Acta MechanicaVol.167, No.3-4, 2004, pp. 123-130.
 Uluslararası Makaleler - Engineering Index

2016

  • Y.A.Onur, C.E.İmrak, T.Ö.Onur, ‘’Investigation of Bending Over Sheave Fatigue Life of Stranded Steel Wire Rope By Artificial Neural Networks’’, Int. J. of Mechanical & Production Eng., Vol. 4, No.9, 2016, pp. 47-49.

2014

  • M.Altuntaş, Ö. Salman , C.E.İmrak, “Experimental Stress Analysis of Elevator Guiding Equipment”, Key Engineering Materials, Vol. 572, 2014, pp.177-180.

2013

  • C.E.İmrak “A Survey on the effects of the 2011 Van, Turkey, earthquakes on elevators”, Elevator-World India, Vol. 6, No.1, 2013, pp.34-39.

2011

  • S.Koç, C.E.İmrak, S.Targıt, “Design parameters and stress analysis of elevator guide rail brackets”, Elevator-World, Vol. LIX, No.6, June 2011, pp.96-103.tact analysis using finite elements, Key Engineering Materials, Vol. 450, 2011, pp. 115-118.
  • C.Erdönmez, C.E.İmrak, “Wire Strand and IWRC Modeling and Contact Analysis using Finite Elements,” Key Engineering Materials, Vol. 450, 2011, pp.115-118.
  • C. Fetvacı, C. E. İmrak, Computer modeling and simulation of spur gears by generating method, Key Engineering Materials, Vol. 450, 2011, pp. 103-106.
  • C. Erdönmez, C. E. İmrak, Wire strand and IWRC modeling and contact analysis using finite elements, Key Engineering Materials, Vol. 450, 2011, pp. 115-118.
  • İ. Gerdemeli, I. Esen, D.Özer, Dynamic response of an overhead crane beam due to a moving mass using moving finite element approximation, Key Engineering Materials, Vol. 450,  2011, pp. 99-102.
  • İ. Gerdemeli, C. Fetvacı, E. Kayaoğlu, Design for assembly in concurrent engineering a case study on its application : glass block holder and glass mold, Key Engineering Materials, Vol. 450,  2011, pp. 141-144.

2006

  • C. E.  İmrak, M. Özkırım, Determination of the Next Stopping Floor in Elevator Traffic Control by Means of Neural Networks, Journal of Electrical & Electronics Engineering, Vol.6, No.1, 2006, pp. 27-33.
  • M. E. Erdoğan, C. E. İmrak, On the Properties of a Special Function Defined by Integral, Math. & Comp. Application, Vol.11  No:1  2006, pp. 11-18.

2005

  • C. E. İmrak, M. C. Fetvacı, İ. Gerdemeli, Yük Kancasının Eğri Eksenli Çubuk Olarak Gerilme Analizi Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.20, No. 2, 2005, pp. 217-223.
  • M. E. Erdoğan, C. E. İmrak, The Effects of Duct Shape on the Nusselt Number, Math. & Comp. Application, Vol.10, No:1  2005, pp. 79-88.  

2004

  • M. E. Erdoğan,  C. E. İmrak, Effect of the side walls on the unsteady flow in a duct of rectangular cross-section, Math. & Comp. Application, Vol.9  No:3  2004, pp.443-448.
  • M. C. Fetvacı, C. E. İmrak, Dişdibi Gerilmelerinin Analizi İçin Düz Dişli Çarkların Sonlu Eleman Modellenmesi, Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.19, No.2, June, 2004, pp 199-203.  
  • C. E. İmrak, M. Özkırım, H. Uzunoğlu, Condition Monitoring of Lift Gear Boxes By Means of Sound Analysis, Proceedings of the 7th Biennal Conference on Engineering Systems Design and Analysis - 2004, Vol.3, 2004, pp 115 - 118.
  • M. E. Erdoğan, C. E. İmrak, On the Unsteady Flows Generated By Impulsive Motion of A Boundary, Math. & Comp. Application, Vol.9 No: 2, 2004, pp. 265-274.

2001

  • C. E. İmrak, M. Özkırım, Preventive and Planned Maintenance of Elevator Installations, Elevator-World, Vol.49, No.6, Haziran 2001, pp. 116-122.  
  • C. E. İmrak, G.C. Barney, The Application of Neural Networks to Lift Traffic Control,Elevator-World, Vol.49, No.5, Mayıs 2001, pp. 82.  

1998

  • C. E. İmrak,Yapay Sinir Ağları ve Asansör Kontrolüne Uygulaması, Gazi Üniversitesi, Mimarlık-Mühendislik Fakültesi Dergisi, Cilt 13 Sayı 1-2, Aralık 1998, pp. 17-28.
Hakemli Uluslararası Makaleler 
2013
  • C.E.İmrak, “A Survey on the Effects of the 2011 Van, Turkey, Earthquakes on Elevators”, Elevator World India, Vol. 6, No.1, 2013, pp.34-39.

2012

  • Y.E.İmrak, “The effects of the Van Earthquakes on lifts”, Elevatori, Vol. 41, No.6, 2012, pp.44-65.
  • M.Kocaman, C.E.İmrak, “Design Optimisation of Elevator Car for Double-Deck System”, International Virtual Journal Machines, technologies, materials, Vol.6 No.8, 2012, pp.37-40

2011

  • S.Koç, C.E.İmrak, S.Targıt, “Design parameters and stress analysis of elevator guide rail brackets”, Elevation, Vol. 2011/03, No.68, 2011, pp.80-93.
  • C.Erdönmez, C.E.İmrak, “Advances in 3D wire rope modeling and numerical analysis”, The Int. J. of Transport & Logistics, Vol. 11, No.17, 2010, pp.57-62.
  • Y.A.Onur, C.E.İmrak, “Strain measurement of stranded rope subjected to bending over sheave fatigue”, The Int. J. of Transport & Logistics, Vol. 11, No.17, 2010, pp.146-149
2010
  • C. E. İmrak, Corrosion and its impact on lift components, Elevatori, Vol. 59, No.2, 2010 pp. 58-70.

2009

  • Y. A. Onur, C. E. İmrak, Computer aided car frame modeling and stress analysis, Elevatori, Vol.39, No.5, 2009, pp. 88-97. 
  • C. E. İmrak, Ö. Salman, An application of reverse engineering in concurrent engineering, Transactions of the VSB- Technical University of Ostrava Metallurgical Series, Vol.52, No.3, 2009, pp. 85-90.
  • C. Erdönmez, C. E. İmrak, Modeling and numerical analysis of the wire strand,Journal of Naval Science and Engineering, Vol. 5, No.12, 2009, pp. 30-38.
  • M. C. Fetvacı, C. E. İmrak, Computerized cutting simulation of involute helical gears generated with rack cutters Int. J. Design Engineering, Vol.1, No.4, 2009, pp.445- 452.
  • C. E. İmrak, İ. Gerdemeli, On the solution of the deflections of thin clamped rectangular plates with a distributed load, Adv. In Math. Sci. Jour (AMSJ), Vol.2009, No.2, 2009, pp. 1-15.
  • C. E. İmrak, İ.Gerdemeli,  Application of the Airy’s stress function to determine friction and maximum pressure coefficients in undercut grooves, Adv. in Math. Sci. Jour (AMSJ), Vol. 2009, No.1, 2009, pp. 1-11.

2008

  •  B. Ünal, İ. Gerdemeli, C. E. İmrak, Modeling and Static Stress Analysis of Shipyard Jib Crane with Finite Element Method, University Review, Vol. 2, No. 4, 2008, pp.7-11.,
  • M .C. Fetvacı, C. E. İmrak, Generation Simulation of Helical Gear Drives by Rack Cutters with Asymmetric Teeth, University Review, Vol. 2, No. 4, 2008, pp. 12-16.
  • Y. Kerküklü, Z. Parlar, V. Temiz, C. E. İmrak, The Effects of the Shaft Surface Roughness on Performance of the Rotary Shaft Seals, University Review, Vol. 2, No. 4, 2008, pp. 16-20.
  • A. Özdemirkıran, C. E. İmrak, M. C. Fetvacı, Design for Assembly and Maintability in Computer Aided Engineering and A Case Study: Packaging, University Review, Vol. 2, No. 4, 2008, pp. 21-25.
  • C. E. İmrak, Accessible Europe 2010, Elevatori, Vol.57, No.1, 2008.
  • C. E.  İmrak, AYSAD becomes full member of ELA, Elevatori, Vol. 57, No.4, 2008.
  • C. E. İmrak, E. Bozdağ, E. Sünbüloğlu, T. Toprak, S. Targıt, Experimental Stress Analysis of Guide Rails, Elevatori, Vol. 57, No. 8, 2008.

2007

  • C. E. İmrak, İ. Gerdemeli, On the shape Factor for the Maximum Pressure of the Undercut Groove Form, Int. Journal of Math. Analysis, Vol.1, No.16, 2007, pp.783-790. 
  • C. E. İmrak, İ. Gerdemeli, An Exact Solution for the Deflection of a Clamped Rectangular Plate under Uniform Load, Applied Mathematical Sciences, Vol.1, No.43, 2007, pp.2129-2137. 
  • S. Kurt, İ. Gerdemeli, S. Dikmen, Istanbul, New Trends for Elevators and Building,Elevatori, Vol.36, No.3, 2007

2006

  • M. K. Kesikçi, İ. Gerdemeli, C. E. İmrak, Stress Analysis of Roller Chain Links, Elevatori, Vol.35, No.3, 2006, pp. 48-61. 

2005

  • C. Alkın, C. E. İmrak , H. Kocabaş, Solid Modeling and Finite Element Analysis of an Overhead Crane Bridge, Acta Polytechnica, Vol. 45, No.3/2005, pp. 61-67.

2004

  • İ. Gerdemeli, C. E. İmrak, M. C. Fetvacı, M. K. Kesikçi, Two Dimensional Modeling and Stress Analysis of Engineering Structures for Boundary Element Analysis, MashininTelekt, Year LII, No: 7-8, 2004, pp. 79-82.
  • İ. Gerdemeli, C. E. İmrak, M. Özkırım, The Critical Velocities of The Free Transverse Vibrations of Moving Conveyor Belts, MashininTelekt, Year LII,  No. 9, 2004, pp. 69-73
  • C. E. İmrak, M. Özkırım, The Pressure Distribution in Undercut Grooves, Elevatori, Vol. 33, No. 2, 2004, pp. 24-35.

2002

  • C. E. İmrak, M. Özkırım, Preventive and Planned Maintenance of Elevators, Elevatori, Vol. 31, No.2/2002, s. 30-44.

2001

  • C. E. İmrak, M. Özkırım, Structures and Selection of Wire Ropes for Elevators, Elevatori, Vol. 30, No.3/2001, s.44-55.

2000

  • C. E.  İmrak, G. C. Barney, Application of Neural Networks to Traffic Control, Elevatori, Vol. 29, No.2, 2000, pp.17-27.  
  • C. E.  İmrak, G. C. Barney, Verkehrsregelung über neuronale Netzwerke, LIFT-REPORT, Vol. 26, No.2, Mart/Nisan 2000, pp.28-37.

1999

  • C. E. İmrak, M. Özkırım, Türkei: Grundlagen der vorbeugenden Wartung, LIFT-REPORT, Vol. 25, No. 5, Eylül/Ekim 1999, pp.38-46.

1998

  • C. E. İmrakVergleich des Rillenfaktors und des Reibungsbeiwertes der Treibscheiben-Seilrille, LIFT-REPORT, Vol.24, No.2, Mart/Nisan 1998, pp.95-97.

1997

  • G. C. Barney, C. E. İmrak, Neural Networks and Traffic Control Systems, Elevatori, Vol. 26, No. 5, 1997, pp.75-85.